Network Multi port Controller

 

item	spec.
Processor	▪ 8bit Micro Controller(AVR) ▪ 128KB Flash ▪ 4KB EEPROM ▪ 4KB SRAM
Network	▪ 10/100M Ethernet ▪ 230Kbps Serial Speed(UART) ▪ TCP, UDP, IP, ARP, ICMP, IGMP, MAC, DHCP, PPPoE, DNS ▪ Connection Type: RJ-45(With LED)
Current Sense	▪ 1Port(External Sensor) ▪ Detect Range: 0.07(0.1 Recommend)~15A/RL 100Ω 기준 ▪ Sensor Wire Length: 280mm(필요 시 길이 확장 사용 가능) ▪ Connection Type: 2P/3.81mm pitch Terminal Block
IR Out	▪ 2Port(External Emitter) ▪ IR Emitter Cable Length: 2.5M ▪ Emitter Type: Single, Red Blink(631nm) ▪ Connection Type: 2P/3.81mm pitch Terminal Block
Serial	▪ 1Port ▪ Serial Type: RS232/485 ▪ Baud Rate: Max 115.2K ▪ Connection Type: 5P/3.81mm pitch Terminal Block ▪ RS232/485 및 120Ω 케이블 임피던스 설정용 2폴 DIP Switch 적용
Relay Out	▪ 3Port ▪ Mode: Dry-Contact ▪ Switching Range(max): 277AC/5A, 30VDC/3A ▪ Connection Type: 2P/3.81mm pitch Terminal Block
Status LED	▪ Power 1ea(Green) ▪ Network 1ea(Green) ▪ Status 1ea(Green)
Power	▪ 12V/1.5A SMPS DC Adaptor

 

The Multi-Controller is a comprehensive and robust device designed to facilitate varied control mechanisms. Here's a detailed breakdown of its features:

 

1. Multiple Control Ports: The Multi-Controller comes equipped with different types of control ports, all designed to cater to a variety of control mechanisms.

   - IR out x2: The device features two Infrared (IR) output ports. These are typically used to control appliances that require IR signals for operation, such as some types of TVs or air conditioners.

   - Relay Out x3: Three relay output ports are incorporated. Relays are used to enable low power electronic devices to control high power electronic devices, providing a valuable bridge in complex electronic systems.

   - Serial(RS232/485): The controller also supports Serial communication (both RS232 and RS485 standards). This kind of communication protocol is commonly used in computers and devices to transmit information.

 

2. CT Sensor Input: The Multi-Controller takes into account the necessity of detecting the On/Off status of control devices. Therefore, it includes a CT (Current Transformer) Sensor Input, which allows the device to monitor and gauge the status of various connected devices, adding to its operational versatility.

 

3. Stable Communication: The device supports stable 10/100M Ethernet wired networking, allowing for reliable data transmission and device communication, a key aspect in control systems that require real-time or near real-time operation.

 

This Multi-Controller is an ideal solution for complex systems requiring various control strategies, offering reliability and versatility in a single, comprehensive device.